LIQUID LATEX

Product code: M30096
Out of stock
£6.00 £7.20 (inc. VAT)
Latex, is a natural air drying liquid rubber easily used to produce thin skinned, highly elastic moulds
Please call for more info 01753 650 958

A former (original model) is simply dipped into the liquid latex. A thin film of latex will cling to the former, and dipping is repeated until a skin of the required thickness is built up.. Immerse the former slowly in the latex, making sure the liquid flows in all dents and undercuts, then remove the former and allow to dry for a few minutes, then repeat the process five or six times to build up a significant thickness. After dipping, the mould should be left to dry thoroughly before removing from the former. Drying will take about 24 hours at 24oC, longer at lower temperatures. Higher temperatures should not be used – if over dried, the latex loses its elasticity. Once dry, the mould should be rinsed in diluted washing- up liquid, then peeled from the former. Before turning back the right way, dust the mould with talc.

View the SDS

product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review
Brand PS Composites
Product Code M30096
Weight 0.5kg