Foams

Scopas Parting Agent will help you release your clay from your cast to create the perfect flat mould prosthetics.

If you want a flawless, bubble-free finish for your plaster casts, and if you’d like your plaster and alginate moulds to be perfectly smooth and free of surface bubbles, then Surface Breaker is just what you need.

FROTH-PAK™ comes in the form of portable two component polyurethane spray foam kits which enables the professional to produce polyurethane foam of exceptionally high quality, quickly and easily, wherever and whenever required. 600L

This gunn foam is just a pigmented version of clear gunn foam. This can be pigmented to your desired colour.

A polyurethane foam which gives a great skin, and is used within the film industry to replicate props.

A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster. 12oz

HOSES TO BE PURCHASED ALONG SIDE THE FROTH PAK

Nozzles for use with the Froth-Pack system.

A sprayable silicone release agent, designed specifically for releasing polyurethanes, polyesters and epoxy resins.

A sprayable wax release agent, suitable for the release of polyurethanes, polyesters and plaster.

A two part hand mixing foam with a good medium density and cell structure. Ideal for application where you need to combine a soft foam with great density. Expands 4-6x its initial volume Mix ratio 2.4-1 by weight

Like the Honey Wax, this is a hard wax, designed for application by hand. When applied onto fibre-glass it gives a great release, with a glossy finish.

Monster Makers foam release agent is a powder type release agent that is brushed into the mould prior to filling with foam latex allowing you to take the cured foam latex out without sticking. It is also a very good release agent for flat moulds when wanting to run prosthetic pieces out of.

Monster Makers foam latex is a prosthetic grade natural foam latex. This is one of the leading foam latex systems in the industry, making it a popular product for both professional SFX artists and students alike.

Pro-cell S3 is a low density flexible Polyurethane foam. The system is designed to have a slow rise, with a cream time of 30-40 seconds, allowing plenty of time for mixing of casts up to 1kg in weight.

A two part hand-mixing foam, perfect for applications which require a soft sponge-like result. Possesses an excellent skin in a closed mould. Mix ratio 2-1 by weight

Liquid Wax release agent for a range of applications, creating a barrier between materials to keep them from bonding to one another and to aid the demoulding of casts from moulds.

M400 Pure shellac varnish works perfectly as a plaster sealer and can be thinned with methylated spirits.

A release agent specifically designed to seperate plaster from plaster.

An excellent mold release for removing epoxy parts out of molds. Also useful for removing silicone encapsulated appliances out of molds. Paintable mold release.